1 Operator 3500 PSI at 5.7 GPM or 2 Operators 3500 PSI at 3 GPM
4'4" x 9'
Hot And Mighty: Hot And Cold Diesel Pressure Washer
5.7 GPM At 3500 PSI
Portable Platform System
335 Gallon Water Tank
The Slider 5357: Premium Portable Platform Cleaning System
Pressure Washers Specifications: HOT AND MIGHTY MDS-5357
- Hot or Cold water pressure washer - 5.7gpm @ 3500 PSI or two guns each operating 3gpm @ 3500psi - 24HP Diesel Motor - Diesel fired Wayne burner system - Stainless steel frame, control panel, coil wrap and fuel tank - Belt drive Tri-plex oil bath General pump - Special pressure regulating unloader for dual gun operation - 3600 PSI safety relief - 2000 Watt generator - Adjustable thermostat - High Pressure soap injection - Low pressure soap injection - Steam Valve - Three Way valve (easily switch from tank supply to fresh water inlet) - Hour meter - 1 Hose Reels - 100 two wire 5,800psi high pressure hose - 1 Heavy duty deluxe 48" variable pressure wand - High pressure stainless steel swivels for the wand - 4 quick connect nozzles - Rotating Nozzle - Bypass line back to holding tank for longer running time in bypass mode - 335 Gallon water tank plumbed with a dump valve for quick draining - Spare Parts Kit
- Heavy duty tube frame - Dimensions: 4'4" x 9' - Built in D rings for unit strap down temporary placement - Built in bolt holes for permanent placement.
- 5 Year coil warranty - 5 Year back end pump warranty - (Note: Warranty Policy May Change For International Partners )
More About The System
This is a Hot And Mighty Mobile Cleaning System. This model was painstakingly developed using the highest quality parts and accessories. We anchor the system with our top of the line skid mount hot water blaster model MDS-5357. This machine is powered by a 24 hp diesel motor delivering 5.7gpm @ 3500psi of pressurized cleaning force. Then we pass the water through a sch 80 cold rolled steel heating coil to heat the water to a sultry 190 deg F. The heat is supplied by a diesel fired Wayne burners system. This machine is a steam combo unit and can deliver 250 deg. F. wet steam at 3500 psi with a simple nozzle change. We added a pressure regulating unloader to allow this system to be split to two guns and supply each gun with approx. 3 GPM at 3500 PSI. There are several added features that set us apart from our competitors, such as fuel water separator filters for the burner and easy drain oil hoses for the pump and motor.
Next, to make this machine truly portable we added a 335 gallon Ace Roto-Mold horizontal leg tank. This tank is plumbed with an easy fill float valve, 2" quick drain dump valve, supply line to the MDS-5357 and a dual bypass line from the machine to allow longer times in bypass mode. Mounted on the Slider is a heavy duty Cox hose reel, the reel has 100' of two wire high pressure hose rated at 6000 psi at 275 deg. F. The 48" variable pressure wands make cleaning easy by allowing you to adjust the pressure right at the wand. We include four quick connect nozzles and one rotating nozzle making any cleaning task or surface manageable. All of this equipment is mounted on top of a 9' x 6' heavy duty tubed Slider frame. The Slider is made to be mounted in an enclosed cargo trailer, open deck trailer, van, box truck or flat bed truck. The slider comes pre-assembled with all the necessary accessories for mounting. The Slider contains welded D rings for easy strapping for temporary placement or bolt holes for permanent placement.